| | Sector | abcEducation And Research Institute | Tender Value | INR 28.12 Lakhs | | Location | Punjab - India | Ref.No | 75350219 | | Closing Date | 10 - Sep - 2024 | | | | Provision of Furniture Items Civil Works and Miscellaneous Items for Project Management Office Cum New Transit Facility at Nasirabad, "eath Work in Excavation By Mechanical Means (hydraulic Excavtor)/manual Means in Foundation Trenches Or Drains (not Exceeding 1.5m in Width Or 10 Sqm on Plan), Including Dressing of Sides and Ramming of Bottoms, for All Lift Including Getting Out the Excavated Soil and Disposal of Surplus Excavated Soil as Directed with a Lead of 50m., A) All Kinds of Soil", "providing and Laying in Position Cement Concrete of Specified Grade Excluding the Cost of Centering and Shuttering - All Work Up to Plinth Level , A) 11 1/23 (1 Cement 1 1/2 Coarse Sand (zone-iii) Derived From Natural Sources 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources)", Reinforced Cement Concrete Work in Beams, Suspended Floors, Roofs Having Slope Up to 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases and Spiral Stair Cases Above Plinth Level Up to Floor Five Level, Excluding the Cost of Centering, Shuttering, Finishing and Reinforcement with 11.53 (1 Cement 1.5 Coarse Sand(zone-iii) 3 Graded Stone Aggregate 20 Mm Nominal Size)., "brick Work with Common Burnt Clay F.p.s. (non Modular) Bricks of Class Designation 7.5 in Foundation in Plinth in , A) Cement Mortar 16 (1 Cement 6 Coarse Sand)", "12 Mm Cement Plaster of Mix , A) 16 (1 Cement 6 Fine Sand)", "distempering with Oil Bound Washable Distemper of Approved Brand and Manufacture to Give An Even Shade , A) New Work (two Or More Coats) Over and Including Water Thinnable Priming Coat with Cement Primer", "providing and Laying Vitrified Floor Tiles in Different Sizes (thickness to Be Specified By the Manufacturer) with Water Absorption Less Than 0.08% and Conforming to is 15622, of Approved Make, in All Colours and Shades, Laid on 20mm Thick Cement Mortar 14 (1 Cement 4 Coarsesand), Including Grouting the Joints with White Cement and Matching Pigments Etc., Complete., A) 600mm X 600mm", "providing and Laying Vitrified Tiles in Different Sizes (thickness to Be Specified By Manufacturer), with Water Absorption Less Than 0.08 % and Conforming to I.s. 15622, of Approved Make, in All Colours & Shade, in Skirting, Riser of Steps, Over 12 Mm Thick Bed of Cement Mortar 13 (1 Cement 3 Coarse Sand), Jointing with Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting the Joint with White Cement & Matching Pigments Etc. Complete., A) Size of Tile 600x600 Mm ", "providing Wood Work in Frames of Doors, Windows, Clerestory Windows and Other Frames, Wrought Framed and Fixed in Position with Hold Fast Lugs Or with Dash Fasteners of Required Dia & Length (hold Fast Lugs Or Dash Fastener Shall Be Paid for Separately)., A) Second Class Teak Wood", "providing and Fixing Isi Marked Flush Door Shutters Conforming to is 2202 (part 1) Decorative Type, Core of Block Board Constructing with Frame of 1st Class Hard Wood and Well Matched Teak 3 Ply Veneering with Vertical Grains Or Cross Bands and Face Veneers on Both Faces of Shutters. , A) 35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges with Necessary Screws ", Extra for Providing Lipping with 2nd Class Teak Wood Battens 25 Mm Minimum Depth on All Edges of Flush Door Shutters (over All Area of Door Shutter to Be Measured)., "providing and Fixing Glazed Shutters for Doors, Windows and Clerestory Windows Using 4mm Thick Float Glass Panes (weight Not Less Than 10 Kg Per Sqm) Fixing with Isi Marked M.s. Pressed Butt Hinges Bright Finished of Required Size with Necessory Screws , A) Second Class Teak Wood , I) 35mm Thick ", "providing and Fixing Aluminium Sliding Door Bolts, Isi Marked Anodised ( Anodic Coating Not Less Than Grade Ac 10 as Per Is 1869), Transparent Or Dyed to Required Colour Or Shade, with Nuts and Screws Ect. Complete , A) 300x16 Mm ", "providing and Fixing Aluminium Tower Bolts, Isi Marked, Anodised (anodic Coating Not Less Than Grade Ac 10 as Per is 1868 ) Transparent Or Dyed to Required Colour Or Shade, with Necessary Screws Etc. Complete, A) 300x10 Mm ", "providing and Fixing Aluminium Handles Isi Marked Anodised ( Anobic Coating Not Less Grade Ac 10 as Per is 1868)transparent Or Dyed to Required Colour and Shade with Necessary Screws Etc Complete , A) 125 Mm", "providing and Fixing Chlorinated Polyvinyl Chloride (cpvc) Pipes, Having Thermal Stability for Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, Including Fixing the Pipe with Clamps at 1.00 M Spacing. This Includes Jointing of Pipe`s & Fittings with One Step Cpvc Solvent Cement and Testing of Joints Complete as Per Direction of Engineer in Charge., A) Internal Work - Exposed on Wall", I) 15 Mm Nominal Outer Dia Pipes, Ii) 20 Mm Nominal Outer Dia Pipes, "providing and Fixing Chlorinated Polyvinyl Chloride (cpvc) Pipes, Having Thermal Stability for Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, Incl |
|
|
If you are a new user, then please
register, it's Free and then fill the form below.
If you are registered with us, just fill the form below, we will get back to you
shortly.
|
All fileds marked with '*' are compulsary.
|
|
|
|